Solar & PV Operators
Yield losses made visible: radiometric inspection to IEC TS 62446-3, a fault report per module, white-label on request.
AI-generatedThe situation
A contiguous block of modules producing nothing is invisible from the ground. The inverter only reports the loss late, the customer calls, and your technician climbs onto a roof without knowing what to look for.
Our approach
Yield losses made visible, delivered as a service under your own brand. Radiometric inspection to IEC TS 62446-3 delivers measured temperatures per module: usable as evidence for manufacturer warranty claims, not pretty pictures but measured values. Every finding is located and prioritised per module: your technician climbs the roof with a plan, not a search. You recommend, we deliver: flight, analysis and report come from us, billed directly to the end customer or through you. The repair the report generates stays with you. White-label under your brand available on request: your customer stays your customer.
Services at a glance
- Radiometric inspection to IEC TS 62446-3: measured values per module, warranty-grade
- Hotspots, anomalous cells and warm junction boxes: located before the inverter reports a fault
- Fault report per module within 48 hours: the complaint call becomes a quotable job
- New service line without investment: you recommend, we fly, the repair stays your business
- White-label under your brand available: discretion as a principle
- Every thermal image backed by a colour image: seamless documentation
Service pages
Three tiers for Solar & PV Operators
Tiers to IEC TS 62446-3: from a single check to ongoing monitoring of your installations.
Aerial PV Check
For one installation or one roof
One-off- Radiometric thermography of the entire module area to IEC TS 62446-3
- Fault report per module: hotspots, defective bypass diodes, substrings, shading, soiling
- Georeferenced fault map for your maintenance team
- Usable for warranty claims against manufacturer and installer
- Delivery within 48 hours
Aerial PV Audit
For installations with yield deviation or before acquisition
One-off- Everything in Aerial PV Check
- High-resolution RGB documentation of every module at 48 MP: glass breakage, delamination, snail trails
- Findings matched against your yield data at string level
- Inspection of substructure, cable routing and inverter locations
- Closing meeting with recommendations and prioritisation
Aerial PV Monitor
For operators of several installations
Recurring- Everything in Aerial PV Audit
- Half-yearly or quarterly inspection flights with trend analysis
- Verification flight after maintenance: proof that faults were fixed
- Portfolio reporting across all sites in one document
- Dedicated contact and priority scheduling
Every package is calculated as a tailored proposal and depends on the property, area, frequency and scope of work. On request, we start with a limited pilot phase.
All packages at a glanceHow it works
Three steps from enquiry to result: an individual proposal, a flight within days, data and report within 48 hours.
Name the project
You name a building, a site or an installation. We reply with an individual proposal, tailored to your project.
We fly
Flown within days: RTK corrected, fully insured, without disturbing your operation.
Data & report
Point cloud, orthophotos, 3D model or condition report within 48 hours, in your formats.
Give us a project
You receive an individual proposal and a pilot flight on special terms for your first property. Dataset and report within 48 hours of the flight.
All enquiries are treated in strict confidence.